Jet 708376 JWL-1220 12-Inch X 20-Inch Wood Lathe

Tuesday, February 7, 2012

How to Build a Bat Rolling Machine

How to Build a Bat Rolling Machine


One of the most searched areas in bat rolling is how to build a bat rolling machine.

How to Build a Bat Rolling Machine

How to Build a Bat Rolling Machine

How to Build a Bat Rolling Machine


How to Build a Bat Rolling Machine



How to Build a Bat Rolling Machine

There are several factors that go into building a bat roller. I will break this article out so you can make a no enlightened decision to whether you want to take on such an endeavor.

Here are some questions that need to be answered before you start a project.

How the machine works Parts and Materials Cost Time

How the Machine Works:

Before any of these can be answered you will first need to decide on what type of machine you are looking at.

Most parallel machines can roll both ways, but a perpendicular machine can only roll 1. Also a perpendicular machine will leave flat spots in the bat and not roll the enTire sweet spot.

We highly recomMend a parallel machine.

The machines work by compressing the carbon fibers and laminates between rollers and then rolling the bat between the rollers. Primarily the sweet spot of the bats are the section you are targeting during the roll.

Material List

Cost

The cost of building a machine can greatly very ... but you can figure the minimum will be $ 200 plus, depending on your bearings and roller materials. It will be more for the state of the art plastics that are being used in the better bat rolling machines.

Time

Building a machine will take some time as you will have to draw out the design and then cut and machine the parts and gather the bearings etc.

Bottom line is this is a project that can be taken on if you are a do it yourself person who has proper equipMent and time and some designing knowledge. To machining background or a friend who has one wouldhelp here.

Another viable option is to purchase a Bat Rolling Machine directly from a reputable manufacturer. Here are a few things to look for when choosing that manufacturer.

You need to stay away from a plastic called Acetal with a trade name of Delrin. It is really hard and has zero forgiveness.

How to Build a Bat Rolling Machine